Quincy Compressor QSI 50, Инструкция, Страница: 85 / 92

Instruction book
2012 2039 28 85
Code on Q-Control
Description on
Q-Control
Explanation Counter measure
Hexadecimal
notation Decimal
notation
0x6113 24851
Drive failure
(software)
CAN communication
overload - Check position of the CAN
termination switch at both sides
of the CAN cable. Both should
be 'OFF'.
0x6114 24852
Drive failure
(software)
The firmware version
is not compatible with
the parameter version - Try to reset the error
- If error returns, contact service
0x7130 28976
Motor
overtemperature
Motor
overtemperature
detected - Let motor cool off - Ensure main
fan and air flow in and out
compressor is not obstructed -
Ensure proper flow of cool air in
compressor room.
- Check for loose connectors at the
control unit of the inverter.
0x8401 33793 Overvoltage
Motor maximum speed
exceeded - Try to reset the error
- If error returns, contact service
0x8402 33794 Overcurrent
Motor startup
unsuccessful;
requested speed not
reached - Wait until the vessel de-
pressureizes by blow off.
(by not resetting the fault
immediately)
- If the problem persists, contact
service
0x9001 36865
Hardware run
enable missing
Hardware enable
signal missing - Check for loose connectors at the
control unit of the inverter and Q-
Control.
- Check for tripped fuses at the
secondary of the transformer T1
in the electrical panel
0x9065 to
91F4 36965 to
37364 Drive failure
(software)
Failure on attempt to
write parameter Pyyy
out of range - Try to reset the error
- If error returns, contact service