Quincy Compressor QED-250, Инструкция

Страница: 25 / 66

Ref. Description Ref. Description
(8) Actual program version (20) Fixed alarm setting
(9) LAN selection (21) Flexible alarm setting
(10) Settings node ID (22) Low dew point alarm and shutdown setting
(11) IP settings (23) High ambient alarm and shutdown setting
(12) Service timer setting (24) Display test
3.6 Calling up ambient temperature
Calling up ambient temperature
Starting from the Main screen, press Scroll button (12). The ambient temperature will be shown:
In the above example, the screen shows that the ambient temperature is 25 ˚C (77 °F).
This temperature is used by the regulation algorithm to calculate a safe dew point in the energy efficient mode
(see section
Calling up/modifying dryer regulation mode ).
3.7 Digital inputs
Status of digital inputs
Starting from the Main screen, press Scroll button (12) until <d. In> is shown and then press the Enter button
(13). A screen similar to the following appears:
The screen shows (from left to right) the status of the remote start/stop switch, the electronic condensate drain
contact and the flow switch.
Contact Description Value Status
1 Remote Start/Stop switch 0 Stop
1 Start
2 Condensate drain contact 0 Drain alarm
Instruction book
2920 7103 90 23