Quincy Compressor QED-250, Инструкция

Страница: 18 / 66

Control panel
Control panel
Text on control panel
Reference Description
(1) Power
(2) Alarm
(3) Test
Table with references
Name Description
L1 LED "drain voltage on"
L2 LED alarm
F Funtions button
The control panel on top of the drain includes a multifunction button and two state display LED's. When LED
L1 is continuously on, this indicates that the solenoid valve is energized; when LED L1 is blinking, this
indicates that the valve is draining. If no water is supplied to the drain, the valve will make a short forced
opening every three hours. LED L2 indicates an alarm situation.
The test button can be used in three different ways:
• When it is pressed during normal operation, it starts a manual drain test.
• When it is pressed during an alarm, it resets the control logic.
• By pressing it for at least five seconds, the self-diagnosis routing will be started. This function is very
useful when the installation is finished, to check if the installation has been successful and to simulate the
alarm situation without having to wait for condensate to build inside the dryer. To return to normal
operation, just switch the drain off and on again.
Instruction book
16 2920 7103 90