Quin Form Industry QF-893, Инструкция по эксплуатации

Страница: 19 / 52

19
Functions of the Computer
You can use the MODE / RESET button to switch between the following information displays:
DIST
: The distance covered.
CAL
: Shows roughly how many calories have been used up.
SCAN : Each display is shown for a few seconds.
TIME : Training time in minutes and seconds.
SPD : Indicates the speed of rotation.
To delete all of the data, hold the MODE / RESET button down for approx. 5 seconds.
Before Initial Use
Before you can use the device, you must:
• unpack the items supplied,
• assemble the device.
Unpacking the Items Supplied
CAUTION!
❐
Keep children and animals away from the packaging material. There is a danger of suffocation!
Unpack all parts and check the items supplied for completeness (see the "Items Supplied and
Device Overview" chapter) and transport damage. If you find any damage to the components,
do not use them (!), but contact the customer service department.
Assembling the Device
Take all parts out of the packaging and place them carefully on a level surface. To be on the safe
side, place a protective film underneath the parts to prevent any damage to delicate surfaces.
Remove all packaging materials from the area in which you are working. Only dispose of the
packaging material once you have inspected all parts to make sure they are complete and for
any signs of transport damage, and after you have finished assembling the device. Follow these
instructions step by step in order to avoid any errors during set-up and use:
03604_DE-GB-FR-NL_V7.indb 19 15.02.2013 14:37:03