. Push open drawer; remove 4 screws on the
bottom interior drawer that holds rails to the
bottom of drawer.
. Remove 4 screws on the bottom part of han-
dle (part # 8807) from interior drawer.
3. Pull drawer out.
4. Move slide rail backward or forward until the
screws that are holding the slide rail to the
side of the drawer is shown.
5. Remove the screws and remove the slide
rail.
6. After replacing the slide rails, reverse the
above procedures to reassemble using re-
movable Loc-Tite on screws.
Rail
Rail
Bottom Part
of Handle
2 Screws
Holding
Slide Rails
Figure 2
Service Manual
QSB-12 & QSB-12S
4
Quikserv Corp.
©
quikserv.com
• -800-388-8307 • Fax (73) 849-5708
Rail Replacement - Part No. 8008