. Remove 0 screws holding back panel to
drawer.
. Remove back panel.
3. Slide the back sections apart to access the
lock assembly.
4. Remove the 4 screws holding the lock assem-
bly to the back panel. Note: Don’t lose the pin
during disassembly.
5. Replace with new lock assembly part # 8806.
6. To reassemble, reverse the above procedures
using removable Loc-Tite on screws.
BACK PANEL
Rear Carriage
Lock Assembly
Figure 1
Service Manual
QSB-12 & QSB-12S
3
Quikserv Corp.
©
quikserv.com
• -800-388-8307 • Fax (73) 849-5708
Rear Carriage Lock Assembly Replacement - Part No. 8006