PAGE 1 OF 2
1115 IH-5501
π
H-5501
HEAVY DUTY 5 CHANNEL
CABLE PROTECTOR
1-800-295-5510
uline.com
INSTRUCTIONS
COMPONENTS
ASSEMBLY
Interlock with dog-bone connectors to extend
protection length. (See Figure 1)
• Inspect areas for safety hazards.
• Assemble sections by aligning female connectors
over male connectors and press with foot to secure.
• Open cover and install cables down into channels.
• Close cover flush with base.
• Test installation for intended use.
• Periodically inspect installation.
CHANNEL CAPACITY
CHANNEL CAPACITY - MAXIMUM DIAMETER
4 Outer Channels
1.375" width x 1" height
Center Channel
1.65" width x 1" height
LOAD CAPACITY
The Heavy Duty 5 Channel Cable Protector has different
load supporting capabilities depending on type of
vehicle and temperature. The load capacity decreases
in warm environments. Test before use and inspect
periodically. Suitability must be verified by testing under
actual conditions.
MODEL
NO.
LOAD CAPACITY PER TIRE
MAX LOAD 70°F (21°C)
LOAD CAPACITY PER AXLE
MAX LOAD 70°F (21°C)
H-5501
16,300 lbs.
32,600 lbs.
OPERATING TEMPERATURE
-40° to 120°F (-40° to 48°C)
CHEMICAL RESISTANCE
Tested for compatibility with common motor oils,
gasoline and diesel fuel. Limited resistance to brake
fluids and other chemicals.
MATERIAL
UV-stabilized polyurethane elastomer.
36" Lineal Protector
End Cap
End Cap
Figure 1
