quiko Swingy QK-SW80, Руководство пользователя

Страница: 8 / 20

Installation of the guide and rigid pull arm
( QK-SW80PULL)
Fig. 11
A
B
C
D
E
F
G
Insert the bracket of the arm (Fig.10 Part A) in the appropriate seat
on the gearmotor and fix it using the two countersunk-head screws
provided (Fig.10 Part B).
Fig. 10
Access the fastening compartment of the guide (Fig.11 Part A) by
removing the cover (Fig.11 Part B). Make at least 4 holes correspon-
ding to the "V" impression on the guide profile. Use the holes to fix
the guide to the frame using the appropriate screws (Fig.11 Part C).
Insert the cylindrical slide (Fig.11 Part D), complete with the relative
spindle, inside the guide and distribute a uniform layer of grease
over the sliding zone.
Then, after finishing the installation of the rigid arm
(Fig.11 Part E), screw the threaded shaft, inserted in
the cylindrical slide, into the hole prepared on the end
of the rigid arm. Close the guide with the caps (Fig.11
Part F) and the screws provided (Fig.11 Part G).
A
B
QKSW80
8