Toner Limited Warranty
This warranty covers QuickLabel QL-300 toner cartridges sold by QuickLabel.
Each QL-300 toner cartridge is warranted to be free from defects in materials and workmanship
for up to 24 months from the date of manufacture if in original unopened packaging, or up to 6
months after installation, whichever occurs first. This warranty applies only to the toner
cartridges as used in the QuickLabel QL-300 printing system.
If the customer suspects a defect in a QL-300 toner cartridge, the customer must notify
QuickLabel within the warranty period. Upon return of the toner cartridge to the QuickLabel
factory and QuickLabel's verification of the defect, QuickLabel will, at its option, either:
1. Replace the defective toner cartridge; or,
2. If the customer has used the toner, pro-rate the price of a new toner based upon the
estimated life remaining for the toner, as reported by the QL-300 system. The QL-300 provides
the estimated life remaining, and QuickLabel may obtain this information from the system
remotely or request the customer to furnish this information.
This warranty does not cover QL-300 toner cartridges that have been emptied, refilled,
remanufactured, modified, refurbished, misused, or tampered with, or that have expired, or
when used to print on label or tag media that is not compatible with the QL-300.
This warranty is void if the QL-300 toner cartridge has been damaged by accident, abuse,
neglect or misapplication, if the product has been improperly installed or maintained, if the
product has been used outside of its environmental specifications, or if the product has been
modified without the express written permission of QuickLabel.
QuickLabel makes no warranty, either express or implied, with respect to this product's
merchantability or fitness for a particular purpose. In no event shall QuickLabel be held liable
for any direct, indirect, special, incidental, or consequential damages, whether based on a
contract, tort, or any other legal theory and whether advised of the possibility of such damages.
ICC Profile
ICC Profile Powered by X-Rite Incorporated
Obtaining Service
To obtain warranted service, please contact QuickLabel Technical Support through one of the
Factory Sales and Service Centers.
Содержание QL-300
