ENGLISH (108:06)
MOUNTING
Pass the hydraulic hoses (fig.28) through the U-bolt
under the beam.
Connect the hoses to the valve, if such is mounted,
acc. the colour marking (fig 27).
Connect the valve control device to the valve so that
the beam is lifted when the lever is brought backwards.
The control device is equipped with a mechanical
catch, which, in locking position, prevents involuntary
operating.
WARNING: The loader valve must always be mounted
with a return hose to tank. If this hose is coupled in
such a way that pressure is obtained, the valve will be
damaged.
Mount the level indicator, Illus. 26, on the bucket ram.
Adjustments are made with an implement attached. The
indicator can be mounted on left alt. right side.
Lift the front of the tractor and check that its wheels and
mudguards are free from loader and subframe at max.
turning angle and oscillation.
Since the loader has been tested on tractors of a certain
type (see Mounting Brackets List) as concerns the
hydraulics, cabs, wheel size, mudguards etc., this
means that use with tractors other than these may need
special measures to be taken when attachment is
made.
REMARK !
Applies to certain loader models:
If you drive a tractor with big front wheels on extremely
rough ground with lowered loader beam, this may lead
to the wheels interfering with the upper part of the
support legs at max. turning angle. In such cases the
support legs should be demounted.
108
27
26
28
