BGA2015 OPERATION MANUAL
Page6
7. control box Instructions
A.
During selecting working flow period, UP and DOWN knobs are used for controlling the
moving upward or downward of cursor but when in standby interface, it can increase or
decrease the digital.
B.
Function of OK key: Make the BGA-IR enter parameters setting mode and cursor move a
step forward.
C.
Function of “cool/stop” key: if BGA-IR in flow, stop an finish flow; if BGA-IR in flow,
open or close cool fan.
D.
Function of “START” key: in standby state, make BGA-IR enter solder and desolder.
E.
Function of “in-out/suck” key: cool fan stretch out or retraction; in desolder mode, when
flow reach T3 section, it can control IR suck mouth suck chip.
8. IR System Operation
8.1 Part Function
* Adjust the Aperture System
The Aperture System of Top Radiator can be adjust from 20×20 (mm) to 60×60 (mm) by two
Adjustment Knobs. Unscrew the knobs before adjusting, and adjust the window size, then
tighten knobs. The scale “2” on the housing means 20mm and “3’ means 30mm, other scale is
similar. For example, if you want to adjust size to 50×50(mm), adjust two knobs to the scale of
“5” and tighten them.
Connect USB line
Connect video line
Connect control box
Connect ground line
