BGA2015 OPERATION MANUAL
Page15
If the bottom sensor is broken, it displays:
If above status happens, user should stop operating.
1.
During the upward or downward movement of Top Heater or holding out and drawing back
of fan arm, if it doesn’t reach over 10 seconds, the unit will come back to initial state all and
singular in spite of what state it is here. It displays:
And forbid all mechanical movement of machine until restart.
2.
When TC is less than 180
℃
during working, if the rising temperature is less than 7
℃
, and
the system will exit the process and display “TC raise error”.
3.
If TC is over than 265
during working, the system will exit the process and display “TC
℃
over error”.
8.3 Operating technics instruction
Note: Top and Bottom Heater will be very hot during working, so please don’ touch the hot
housing parts.
Note: The laser alignment device includes a secondary laser device, so don’t see the laser bean
directly.
TC: ***
℃
Tb: ***
℃
T sense error !
TC: ***
℃
Tb: ***
℃
B sense error !
TC: ***
℃
Tb: ***
℃
Move error !
