Qufora IrriSedo MiniGo, Инструкция по эксплуатации

Страница: 5 / 44

5
EN
Filling Qufora IrriSedo MiniGo with water
7. Sit on or over the toilet. Carefully guide the cone up to its base into the rectum.
8. Now the cone is in place, gently squeeze the pump to instil water into the rectum.
The pump can be squeezed several times to instil the water.
9. Remove the cone from the rectum. Faecal matter and water will be expelled into the
toilet.
Using Qufora IrriSedo MiniGo
Sticky
area
Click
1. Wash and dry your hands.
2. Open the lid and fill the pump up to the inner rim with luke warm tap water (36-38° C)
by holding it under the tap with the lid open.
3. Once the pump is filled to the inner rim hold onto the top part of the pump and press
down on the lid until you hear the click sound.
4. Open the cone pouch at the perforated line. Whilst the cone is still in the pouch press
the cone firmly to the small round opening on the lid to assemble your system.
5. Attach the empty pouch to a surface using the sticky area on the back of the pouch.
6. To activate the hydrophilic coating on the cone, wet the cone with water up to its base.
Gently squeeze the pump until water comes out of the cone tip to remove the air. It is
now ready to use.
1 2 3
4
5 6
7 8 9
A few
seconds
Instructions for use