Quest Engineering DL4300 Скачать руководство пользователя

Страница: 297 / 540

DL4300 Appliance

Submitting a replication request to a third-party service provider

297

On the Seed Drive Options page of the Replication Wizard, enter the information as described in

the following table.

Table 138. Seed drive options

Item

Description

Maximum Size

Large archives of data can be divided into multiple

segments. Select the maximum amount of space

you want to reserve for creating the seed drive by

doing one of the following:

•

Select Entire Target to reserve all available space in

the path provided on the Seed Drive Location page

(for example, if the location is D:\work\archive, all of

the available space on the D: drive is reserved).

•

Select the blank text box, enter an amount, and then

select a unit of measurement from the drop-down

list to customize the maximum space you want to

reserve.

Recycle action

In the event the path already contains a seed drive,

select one of the following options:

•

Do not reuse. Does not overwrite or clear any

existing seed data from the location. If the location

is not empty, the seed drive write will fail.

•

Replace this Core. Overwrites any pre-existing seed

data pertaining to this core but leaves the data for

other cores intact.

•

Erase completely. Clears all seed data from the

directory before writing the seed drive.

Comment

Enter a comment that describes the seed drive.

Add all Agents to Seed Drive

Select this option to replicate all protected machines

on the source core using the seed drive. This option

is selected by default.

Build recovery points chains (fix orphans)

Select this option to replicate the entire recovery

point chain to the seed drive. This option is selected

by default.

NOTE:

Typical seeding in AppAssure 5.4

replicated only the latest recovery point to

the seed drive, which reduced the amount

of time and space required for creating

the seed drive. Opting to build recovery

point (RP) chains to the seed drive requires

enough space on the seed drive to store

the latest recovery points from the specified

protected machine or machines, and may

take additional time to complete the task.

Содержание DL4300





























































































































































































































































































































































































































































































































































Результаты поиска

Содержание DL4300

Отзывы:

Похожие инструкции для DL4300

Бренды по названию

Популярные бренды

Quest Engineering DL4300, Руководство пользователя

Результаты поиска

Содержание DL4300

Отзывы:

Похожие инструкции для DL4300

Бренды по названию

Популярные бренды