Quectel RM505Q-AE Скачать руководство пользователя | Manualshive

Страница: 2 / 87

background image

5G Module Series

RM505Q-AE Hardware Design

RM505Q-AE_Hardware_Design 1 / 79

Our aim is to provide customers with timely and comprehensive service. For any assistance,

please contact our company headquarters:

Quectel Wireless Solutions Co., Ltd.

Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai

200233, China

Tel: +86 21 5108 6236

Email: [email protected]

Or our local office. For more information, please visit:

http://www.quectel.com/support/sales.htm.

For technical support, or to report documentation errors, please visit:

http://www.quectel.com/support/technical.htm

Or email to [email protected].

General Notes

Quectel offers the information as a service to its customers. The information provided is based upon
customers’ requirements. Quectel makes every effort to ensure the quality of the information it makes
available. Quectel does not make any warranty as to the information contained herein, and does not

accept any liability for any injury, loss or damage of any kind incurred by use of or reliance upon the

information. All information supplied herein is subject to change without prior notice.

Disclaimer

While Quectel has made efforts to ensure that the functions and features under development are free

from errors, it is possible that these functions and features could contain errors, inaccuracies and

omissions. Unless otherwise provided by valid agreement, Quectel makes no warranties of any kind,

implied or express, with respect to the use of features and functions under development. To the maximum

extent permitted by law, Quectel excludes all liability for any loss or damage suffered in connection with

the use of the functions and features under development, regardless of whether such loss or damage

may have been foreseeable.

Duty of Confidentiality

The Receiving Party shall keep confidential all documentation and information provided by Quectel,

except when the specific permission has been granted by Quectel. The Receiving Party shall not access
or use Quectel’s documentation and information for any purpose except as expressly provided herein.
Furthermore, the Receiving Party shall not disclose any of the Quectel's documentation and information

to any third party without the prior written consent by Quectel. For any noncompliance to the above

requirements, unauthorized use, or other illegal or malicious use of the documentation and information,

Quectel will reserve the right to take legal action.

«
1
2
3
4
...
»

Содержание RM505Q-AE
























































































Отзывы:

Нет отзывов

Похожие инструкции для RM505Q-AE

Бренд: Ebyte Страницы: 11

Бренд: Ebyte Страницы: 16

Бренд: Redpine Signals Страницы: 44

Бренд: Ebyte Страницы: 28

Бренд: Quectel Страницы: 23

Бренд: Quectel Страницы: 26

Бренд: Thitronik Страницы: 52

Бренд: Sengled Страницы: 7

Бренд: Embit Страницы: 24

Бренд: ADC Technology Страницы: 10

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды