Configuration and Operation
37
Note:
You may have to consult with your System Administrator to activate this function.
Traps for SNMP v1/v2/v3
Traps are used by the camera to send messages to a management system for important events or
status changes.
Enable traps
– Check this box to activate trap reporting.
Trap address
– Enter the IP address of the management server.
Trap community
– Enter the community to use when sending a trap message to the
management system. The default value is
public
.
Trap Option
Warm start
– A warm start SNMP trap signifies that the SNMP device, such as the
camera, performs a software reload.
Click
Save
when complete.
7.3.3.4
UPnP
The
UPnP
page enables the Universal Plug-and-Play protocol on your network devices.
Figure 37: UPnP Screen
