Quartech 9605, Руководство по эксплуатации продукта

Страница: 11 / 18

Section 3: Setup Mode
Page 9
PM9605 Revision 1, 9605 Version 36.1.1
3.2 Test Diagnostic Mode
The 9605, while in Setup mode, has a keyboard and communication diagnostic test built in. Test Mode can be
accessed by pressing the [8] key while in Setup mode or by holding down any key during power up when the slide
switch is off. All LEDs will turn off except LED 1,2,& 3 which will flash green. Press the desired key 1,2, or 3 to
begin the tests which are described below:
1 Keyboard test This test will verify the integrity of the individual switches. The associated LED will
illuminate upon pressing a particular key. If the LED does not illuminate with the
action of the switch, the keyboard may be damaged.
2 LED test This test will prove that power is reaching all of the printed circuit boards and the
microprocessor is operating. Upon entry into this test the LEDs will cycle one by one
in the green color state and repeat for the other LED colors. If one or more of the
LEDs do not cycle they may be faulty.
3 Communication This test functions like the LED test, but its purpose is to exercise and test the
electronics associated with the communication port on the 9605. If the port is
functional the LEDs will cycle one by one in the green color state, and repeat for the
other LED colors. If the port is not functional the 9605 will signal an error.