Quark-Elec QK-G033 Скачать руководство пользователя страница 23

Страница: 23 / 23

Quark-elec Manual

https://www.quark-elec.com

23 of 23

2018

V1.52

for any transportation costs incurred in returning the unit to Quark-Elec. This warranty does not cover failures due to

abuse, misuse, accident or unauthorized alteration or repairs. A returns number must be given before any unit is sent

back for repair.

The above does not affect the statutory rights of the consumer.

Disclaimer

It is the user’s responsibility to use this product prudently. Neither Quark-, nor their distributors or dealers accept

responsibility or liability either to the products user or their estate for any accident, loss, injury or damage whatsoever

arising out of the use or of liability to use this product.

Quark- products may be upgraded from time to time and future versions may therefore not correspond exactly with

this manual. The manufacturer of this product disclaims any liability for consequences arising from omissions or

inaccuracies in this manual and any other documentation provided with this product.

Document history

Issue

Date

Changes / Comments

V1.0

10/10/2018

Initial release

For more technical information and enquiries please go to https://quark-elec.com/forum/

For sales and purchasing information, please email us at: [email protected]

Содержание QK-G033
























Результаты поиска

Содержание QK-G033

Отзывы:

Похожие инструкции для QK-G033

Бренды по названию

Популярные бренды

Quark-Elec QK-G033, Руководство пользователя

Результаты поиска

Содержание QK-G033

Отзывы:

Похожие инструкции для QK-G033

Бренды по названию

Популярные бренды