Quark-elec Manual
https://www.quark-elec.com
13 of 23
2018
V1.52
10.1. Setup QK Main Controller SIM Number
The first page you will see when opening the app is the login page. Here you can set two different SIM
numbers for 2 different G033 devices. Enter the telephone number of the SIM card that you inserted into the
G033 where it says ‘
Device 1
’ in the app. If you have 2 G033 devices then you can enter the second SIM
card number where it says
‘Device 2’
. The app will save these numbers so you don’t have to keep entering
them.
Input the number of the SIM card which is inserted into the
G033into ‘
Device 1’
. All command SMS messages will be sent
to this number via the APP.
Check the tick box to the right of the number you would like to
control. Then press the ‘
login
’ button.
Once the SIM card number have been stored, the APP will reply
with a confirmation message
