Quark-elec Manual
https://www.quark-elec.com
15 of 23
2018
V1.52
setting on the jumpers on the board. See chapter 11.4) and then reverts back to the previous state. When working
in self locking mode, the relay will stay active until the next command is received. The G033 can also report the
relay working status And check the temperature for each sensor via the app.
Relay working mode:
This will inform the user which
relays
are in self-lock or latching mode. This is for relays 1 and 2
Relay working status:
This tells the users which relays are in the
normal open position and which are in the normal closed position.
10.5. Rename control terminals
The control terminals can be renamed as a meaningful name in APP. For example Heater or Cooler. The RF
switch option has been discontinued and is there for customers still with RF switches.
Click the white box of the relay or switch that you would like to
rename. You will receive a pop-up in your mobile to change the
name. Type in the new name and click enter.
10.6. Control panel
The control panel provides the main operating interface for turning relays on and off and setting timers. By clicking
‘
ON’
in the app, a message will be sent to the G033 turning the specific relay on. This is the same for the ‘
OFF
’
button.
