Quantum ValueLoader DLT VS160, Инструкция по установке и эксплуатации

Страница: 35 / 60

DLT VS160 Tape Drive Installation and Operations Guide
81-81191-01 Rev A01 January 2004 3-19
3.4.2 Microsoft Windows 2000
1. Make sure that you are logged on to the server or workstation with Administrator privileges.
2. Download the required drivers from www.quantum.com .
3. Right-click My Computer (icon) on the Windows desktop, click Manage , then click Device
Manager .
4.
The DLT VS160 tape drive is listed under the “? Other Devices” item as “Quantum DLT VS160
SCSI Sequential Device.”
5. Right-click Quantum DLT VS160 SCSI Sequential Device , click Uninstall , and then click OK
to confirm that you want to remove the device.
6.
Click Action in the upper-left corner of the Computer Management dialog or right-click anywhere
in the right pane of the dialog.
7. Click Scan for Hardware Changes . Windows 2000 now scans for the DLT VS160 tape drive.
The DLT VS160 tape drive appears under “? Other Devices” again.
8.
Right-click Quantum DLT VS160 SCSI Sequential Device , and click Properties .
9.
Click Reinstall Driver .
10.
When the Upgrade Device Driver Wizard appears, click Next .
11.
Click Display a list... and then click Next .
12.
Click Tape Drives . You may need scroll down to see this item.
13.
Click Install From Disk , type the path to the driver you downloaded in step 2, and click OK .
14.
Click Quantum in the Manufacturers box.
15.
Click Quantum Value DLTtape™ DLT VS160 Drive, and click Next .
16.
Click Next to install the driver.
17.
Click Finish .
18.
Close the Device Properties dialog box.
The tape drive now appears in the Device Manager under Tape Drives, listed as “DLT VS Tape Drive,”
and is ready to use.