Quantum Q-LOGIC 3e, Руководство пользователя

Страница: 9 / 28

9
Drive Profile Selection
Your Q-Logic 3e Controller may be programmed for up to
four drive profiles that allow the system to be custom-tailored
to your environment. Profiles 1 – 3 may be selected by
pressing the Mode button. The selected profile is displayed
on the Drive Screen.
NOTE: Drive profiles are set by your Quantum Rehab
Provider. Contact your Quantum Rehab Provider to
change or add a drive profile.
To select a profile setting using the Mode Button:
1. Push the On/Off Button once to power on the chair and
the controller.
2. Push the Mode Button to select a drive profile. Cycle
through the four available drive profiles.
3. Continuing to push the button will cycle through the
Setting screen and Seat screen (if power positioning is
present), then back to Drive profile 1.
Drive/Function Inhibit status is read-only in your
actuator adjustment (seat screen). This function is
disabled in drive mode in order to prevent unintended
loss of function in your power chair. Take caution when
negotiating, obstacles, ramps, and inclines. Whenever
possible, use an attendant in these conditions.
Operating your power chair on inclines and/or with tilt/
recline function will affect your power chair's stability.
Actuator Adjustment (Seat Screen)
The Q-Logic 3e Controller can control five power seat
actuators, using the mode button and the joystick.
To select and adjust an actuator:
1. Push the On/Off Button once to power on the chair and
the controller.
2. Push the Mode Button several times until the seat
screen is displayed on the LCD or push the middle soft
key button once to go directly to actuator mode.
3. Push the joystick to the left or right to cycle through
the available actuators until the desired actuators are
illuminated on the actuator indicator. See figure 1.
4. When the desired actuator is selected, give a forward
command to the joystick to adjust position in one
direction or give a reverse command to the joystick to
adjust position in the opposite direction. If you continue
to push the Mode Button, it will cycle through the Drive
screens and Auxiliary screen, and then return to Seat
Screen.
5. Push the Mode Button until you return to the desired
drive profile.
WARNING!
NOTE: The Drive/Function Inhibit status is affected only
in the actuator adjustment (seat screen).
Recline & ELR/ ALR Mode
(both)
Elevating Seat Mode
Figure 1. Actuator Selection
BASIC OPERATION INSTRUCTIONS
Tilt Mode
Recline Mode
Articulating Foot Platform