Quantum Q-LOGIC 3e, Руководство пользователя

Страница: 6 / 28

6
The Q-Logic 3e Controller
The Q-Logic 3e Controller is a fully programmable, modular
electronic controller system that allows you to operate your
power chair. The hand control will primarily be discussed in
this manual along with references to the Attendant Control.
Contact your Quantum Rehab Provider for more information.
The controller has been pre-programmed to meet a typical
user's needs. The program is adjusted using either a
personal computer with software provided by the controller
manufacturer or with a handheld programmer, also provided
by the controller manufacturer, by your Quantum Rehab
Provider or a trained service technician.
The controller program can affect speed acceleration,
deceleration, dynamic stability, and braking. If it is
programmed incorrectly or outside of the safe limits
as determined by your healthcare professional, it can
create a dangerous situation. Only your Quantum Rehab
Provider or a trained technician should program your
controller.
Precautionary Guidelines
Before operating the Q-Logic 3e Controller please read the
following. These guidelines are provided for your benefit and
will aid you in the safe operation of the seating system.
„ Turn off the power to the controller before you are seated
in your power chair.
„ Always have assistance when you are being seated in
your power chair.
„ Follow all of the procedures and heed the warnings
as explained in your power chair owner’s manual and
Consumer Safety Guide.
Operating the Q-Logic 3e Controller
The Q-Logic 3e hand control is used to operate your power
chair and all of its components.
On/Off Button
The On/Off button turns the system on and off. It also resets
the controller if the LCD screen shows a prompt of a finger
pressing the power button when programming has been
updated
When faced with an emergency situation, release the
joystick, then press the on/off to stop the power chair.
Use caution. Be advised that pressing the on/off button
may cause the power chair to stop abruptly.
Always turn the power off when you are stationary to
prevent unexpected movement.
WARNING!
WARNING!
Joystick
The joystick controls the driving speed and direction of the
power chair and is used to navigate the menus on the LCD
screen. When the joystick is at rest, it is in the neutral (center)
position and the chair is stationary. In order to drive the chair,
the joystick must be taken out of neutral. Moving the joystick
in any direction will switch the chair from neutral to drive,
and the chair will move in the direction indicated by the
joystick position. The farther away from the neutral position
the joystick is, the faster the chair will move in that direction.
To stop chair movement, simply release the joystick or move
it back to the neutral position. The chair’s electromagnetic
brakes will engage after the chair has come to a controlled
stop.
Lock/Unlock Procedure
The Q-Logic 3e Controller comes with a programmable lock/
unlock option.
NOTE: The lock-out feature is not programmed at
the factory. To have this feature added, contact your
Quantum Rehab Provider.
To lock the controller:
1. Push the On/Off Button once to power on the chair and
the controller.
2. Push and hold the Mode Button until the controller
turns off. The controller is now locked.
To unlock the controller:
1. Push the On/Off Button once to power on the chair
and the controller. The “System Lock Icon” will appear
on the display screen.
2. Move the joystick to the full forward position until you
hear a beep.
NOTE: This will take several seconds.
3. Move the joystick to the full reverse position until you
hear a beep.
NOTE: This will take several seconds.
4. Release the joystick. The controller is now unlocked.
Speed Adjustment
The speed adjustment is used to control the speed of the
power chair.
To change the speed:
1. Push the On/Off Button once to power on the chair and
the controller.
2. To increase your speed, press the speed up soft key.
3. To decrease your speed, press speed down soft key.
The speed indicator arc will increase and decrease as the
speed arc keys are pressed, providing a visual display of
how fast the chair will move.
BASIC OPERATION INSTRUCTIONS