Quantum Q-LOGIC 3e, Руководство пользователя

Страница: 7 / 28

7
1 2
3
Keypad
The keypad is located directly in front of the joystick. It
contains the components that you will use to control your
power chair.
Horn Button
The horn button activates a warning horn.
Mode Button
The mode button is used to cycle through Drive Profiles,
Seat Mode (if equipped) and Settings Mode.
Page Button
The page button is used to cycle through the soft key pages.
NOTE: The soft key pages can be changed by your Quantum
Rehab Provider.
Soft Keys
The soft keys will perform the action depicted directly above
them. This action may change depending on the screen and
it will change with the page button.
NOTE: If your Q-Logic 3e Controller is equipped with
a lighting system, the soft key buttons will default to a
light and left/right turn indicator.
Light Soft Key
The light soft key controls the front headlights and rear
running lights.
To operate the lights:
1. Push the On/Off Button once to power on the chair and
the controller.
2. Press the light soft keys button once to activate the front
headlights and rear running lights.
3. Press the light soft key button again to turn off the
lighting system.
NOTE: On the Drive Screens a light icon will be displayed
above the speed arc when the headlights are on.
Left/Right Turn Indicator Soft Keys
The left/right turn indicator soft keys toggle either the left or
right turn indicators.
To operate the turn indicators:
1. Push the On/Off Button once to power on the chair and
the controller.
2. Press the desired turn indicator soft key once to turn on
that indicator.
3. Press the same turn indicator soft key again to turn off
that indicator.
NOTE: If the left turn indicator is activated, pressing the
right indicator soft key will turn off the left indicator and
activate the right indicator.
NOTE: On the Drive Screens a Left/Right turn indicator
icon will be displayed next to the speed arc when the
Left/Right turn indicator is on.
NOTE: The turn indicator soft keys also control the
hazard lights. Press both turn indicator soft keys at the
same time to activate the hazard lights and press both
buttons again to turn off the hazard lights. If the hazard
lights are left on and the controller is turned off, the
hazard lights will continue to flash. The Q-Logic 3e must
be turned back on and both turn indicator buttons must
be pressed to deactivate the hazard lights.
Drive Mode
Setting Mode
Seating Mode
BASIC OPERATION INSTRUCTIONS