Quantum Q-LOGIC 3e, Руководство пользователя

Страница: 12 / 28

12
Settings Screens
The following pages explain the various screens you will use
with the Q-Logic 3e Controller. Contact your Quantum Rehab
Provider with any questions you may have.
NOTE: Some screens in this Basic Operating Instructions
may differ from your system depending on configuration
and options selected.
To change the horn volume:
1. Push the Mode button, until setting screen is displayed.
2. Push the joystick up to enter the available setting
subjects. Push left or right to change the settings.
3. When the desired subject is displayed on the screen,
push the joystick up or down to adjust that setting.
After "Horn" is displayed, an up command will increase
volume, a down command will decrease volume.
NOTE: Any time a setting is changed, the system will
back up the configuration to the power base. When the
system is turned off, "parameter backup" will be
displayed on the screen before the system turns off.
To change the display brightness:
1. Push the Mode button, until setting screen is displayed.
2. Push the joystick up to enter the available setting
subjects. Push left or right to change settings subject.
3. When the desired subject is displayed on the screen,
push the joystick up or down to adjust that subject.
After "Display Brightness" is displayed, an up command will
increase brightness and a down command will decrease
brightness.
Drive Screen
Settings
Sound
Brightness
To change the horn volume: To change the display setting:
1. 2.
3.
3.
BASIC OPERATION INSTRUCTIONS
Drive Screen Settings
1. 2.