42
Initializing the Storage Arrays and Software
DXi6902 Installation and Configuration Guide
5
On the
Hardware Check Menu
, type the option for
Check HBAs
and press
<Enter>
.
The system displays information about all expansion cards installed in the Node (see
).
Make sure all of the installed expansion cards are detected. If one or more expansion
cards are not detected, or are detected in the wrong slots, resolve the issue before
continuing (see
Figure 39 PTO: Check HBAs
6
Press
q
to return to the
Pick to Order Menu
.
7
On the
Pick to Order Menu
, type the option for
RAID initialize
and press
<Enter>
.
The system displays the following message:
This will wipe and start a background RAID initialization for the
external storage.
By default, all attached storage trays will be wiped, and used for
the RAID initialization.
Do you want to continue (y/n)?
8
Type
y
and press
<Enter>
.
The system displays the following message:
n
Array(s) found
Is this correct (y/n)?
PCI Slot: 1, Intel Corporation Ethernet 10G 2P X520 Adapter (rev 01)
PCI Slot: 2, -
PCI Slot: 3, QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI Express HBA (rev 02)
PCI Slot: 4, -
PCI Slot: 5, LSI Logic / Symbios Logic SAS2116 PCI-Express Fusion-MPT SAS-2 [Meteor] (rev
02)
PCI Slot: 6, LSI Logic / Symbios Logic SAS2116 PCI-Express Fusion-MPT SAS-2 [Meteor] (rev
02)
PCI Slot: 7, QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI Express HBA (rev 02)
Running 'autoconfig' to check for valid PCI slot configurations.
Starting Auto Configuration...
INFO:: Auto Configuration started.
INFO:: Auto Configuration completed
Содержание DXi6902
Страница 2: ......
Страница 51: ...Performing Initial Configuration 49 DXi6902 Figure 44 Getting Started Wizard Network...