Quantum DXi6900 Скачать руководство пользователя страница 65 | Manualshive

Страница: 65 / 82

background image

Performing Initial Configuration

Quantum DXi6900 Installation Guide

65

b. (Optional) Enter the

Default Gateway IP

address.

Specifying a default gateway is optional if all access is local to a particular subnet. For example, if
the DXi6900 and all of its clients are on the same subnet, you do not need to specify a default
gateway.

Caution:

Specifying a default gateway is required to enable connectivity with all subnets

other than those that the DXi6900 is directly connected to. For example, if thDXi6900 and its
clients are on different subnets, you must specify a default gateway.

c. (Optional) In the

DNS Suffix Search List

box, enter the local domain to search first when

resolving domain names.

The domain suffix is a single domain name. The domain name may contain only letters (A–Z),
numbers (0–9), dots (.), and hyphens (-).

d. (Optional) In the

Primary

,

Secondary

, and

Tertiary

DNS IP Address

boxes, enter the IP

address of up to three DNS servers used to resolve domain names and translate them into IP
addresses.

Caution:

You must specify a DNS IP address if you plan to use hostname format when

configuring an NTP time server, outgoing e-mail server, replication sources and targets, and
other information.

9. Under

IP Address Configuration > Bonding Details

, configure each Ethernet port as a separate

network device:

a. If necessary, click the

Show

link to show the bonding details table.

b. In the

Not Bonded

row, make sure each Ethernet port is selected (

eth1

,

eth2

, and so on).

c. If necessary, click

Update

to save the changes you made to the Bonding Details table.

10. Do not make any changes under

IP Address Configuration > Interface Details

unless directed by

your network administrator. (For more information about the VLAN tag and MTU size options, see the
“Network” section in the

Quantum DXi6900 User’s Guide

(6-68159).

11. Under

IP Address Configuration > IP Address Table

, enter network information for the eth1

device:

Note:

Do not make any entries in the VLAN ID, External Host IP, NATed, or NAT IP Address

columns unless directed by your network administrator.

a. Select the

eth1

row in the table. Or, if necessary, click Add IP in the eth1 row to enable entry in the

IP Address

box.

b. Enter the following network information as provided by your network administrator (all fields are

required):

Caution:

Make sure you enter the correct IP address information and that you write this

information down. If you enter the incorrect IP address information and reboot, you will not be
able to access the system.

«
...
63
64
65
66
67
...
»

Содержание DXi6900



















































































Отзывы:

Нет отзывов

Похожие инструкции для DXi6900

ShareCenter DNS-343

Бренд: D-Link Страницы: 12

My Passport for Mac

Бренд: Western Digital Страницы: 2

Бренд: QNAP Страницы: 39

System Storage N3150

Бренд: IBM Страницы: 24

Бренд: OCZ Страницы: 3

Бренд: LaCie Страницы: 27

Бренд: 7-BIT Страницы: 4

Бренд: Lifetime Страницы: 52

Бренд: Rocstor Страницы: 132

Бренд: Thecus Страницы: 130

Бренд: SonicWALL Страницы: 2

DOUBLE BIN ULX-240-1

Бренд: ulsonix Страницы: 9

Бренд: Seagate Страницы: 36

Cheetah 15K.7 FC

Бренд: Seagate Страницы: 90

Бренд: Yardmaster Страницы: 28

5BIG THUNDERBOLT 2

Бренд: LaCie Страницы: 20

Option GlobeTrotter

Бренд: ORANGE Страницы: 34

Бренд: Yardmaster Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды