Quantum DXi6900 Скачать руководство пользователя страница 58

Страница: 58 / 82

Initializing the Storage Arrays and Software

Quantum DXi6900 Installation Guide

All done with 'Qarray1'

Done with Qarray1

All shell jobs finished.

RAID initialization is now running in the background.

You should reboot so that the DXi node can properly see all the new LUNs.

After the reboot, log in and continue the PTO menu steps.

Reboot now [y/n]?

10. You must reboot the system for the Node to properly see all new LUNs. Type y and press

<Enter>

reboot the system.

Wait for the system to boot. (This can take up to 10 minutes.)

11. Access the

PTO Menu

again:

a. Using a terminal emulation program that supports SSH (like PuTTY), connect to the Node with the

following IP address:

10.17.21.1

b. Enter

ServiceLogin

for the user name and then enter the service password (Qa@SmX7!).

c. At the command prompt, type the following command and press

<Enter>

sudo -i sh

d. At the command prompt, type the following command and press

<Enter>

sh /opt/DXi/scripts/service.sh

e. Type the option for

Pick to Order (PTO)

and press

<Enter>

12. On the

Pick to Order Menu

, type the option for

Software initialize

and press

<Enter>

The system displays the following message:

This will start the Software initialization.
Do you want to continue (y/n)?

13. Type

and press

<Enter>

The system configures the StorNext file system, creates a blockpool index, and performs other tasks.
This can take several minutes. When the initialization is complete, the following message displays:

Software successfully initialized.
Run 'Finalize PTO' option.

14. On the

Pick to Order Menu

, type the option for

Finalize PTO

and press

<Enter>

The system displays the following message:

PTO is now Disabled.
Reboot to start the DXi stack [y/n]?

15. Type

and press

<Enter>

Содержание DXi6900



















































































Результаты поиска

Содержание DXi6900

Отзывы:

Похожие инструкции для DXi6900

Бренды по названию

Популярные бренды

Quantum DXi6900, Руководство по установке

Результаты поиска

Содержание DXi6900

Отзывы:

Похожие инструкции для DXi6900

Бренды по названию

Популярные бренды