Quantum Data 802BT Скачать руководство пользователя страница 172

Страница: 172 / 744

162

Chapter 9

Testing HDMI Sink Devices

5. Press and release the

Step

key.

The

Step

key illuminates.

6. Using the

Image

knob, select the appropriate InfoFrame type.

The contents of the appropriate InfoFrame output appears on the HDMI display.

7. When finished, press and release the

Step

key.

The light on the

Step

key extinguishes.

Testing with Active Format Description (AFD)

When transporting HDMI video images from a source to a display, different formats may

be used between the content, transmission signal, and display. To provide compatibility

between the different formats, Active Format Description (AFD) is used.

AFD describes the portion of the coded video frame that is "of interest" (or “active”). The

appropriate AFD information is transmitted with the video to the HDMI display as part of

AVI InfoFrame packets. Using AFD information, the display is able to present the image

optimally.

For AFD testing, the generator allows you to apply different AFD cases using the AFDtest

image, which provides 12 different cases (as image versions) for both 4:3 and 16:9

displays. As each image version appears, the appropriate AFD information is sent with the

video to the display.

The following table lists the AFD cases (as specified in the

ETSI TR 101 154 v.1.4.1

standard) that are provided by the generator.

AFD case

Image
Version
(4:3 Format)

Image
Version
(16:9 Format) Aspect Ratio of Active Area

box 16:9 (top)

box 14:9 (top)

9-12

box > 16:9 (center)

Same as the signal format

4:3 (center)

16:9 (center)

14:9 (centered)

4:3 (with shoot and protect 14:9 center)

16:9 (with shoot and protect 14:9 center)

16:9 (with shoot and protect 4:3 center)

Содержание 802BT









































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 802BT

Отзывы:

Quantum Data 802BT, Руководство пользователя, Страница: 172 / 744

Результаты поиска

Содержание 802BT

Отзывы: