Quantum Data 802BT Скачать руководство пользователя страница 168

Страница: 168 / 744

158

Chapter 9

Testing HDMI Sink Devices

4. Using the

Image

knob, select the appropriate image (see table above).

The image appears on the connected HDMI display. The image shows the current

settings for the HDMI audio output. For example, the Audio_1 image is shown below.

5. Press and release the

Step

key.

The

Step

key illuminates.

6. Using the

Image

knob, adjust the amplitude or frequency (based on the selected

image) of the HDMI audio output.

7. To verify proper HDMI audio handling, check the following on the HDMI display:

•

Audio is output from the proper channels.

•

When amplitude is adjusted, the volume is subsequently changed.

•

When frequency is adjusted, the pitch is subsequently changed.

8. When finished, press and release the

Step

key.

The light on the

Step

key extinguishes.

9. To test another HDMI audio output type, return to step 4.

Testing HDMI audio using an external audio source

The generator provides basic

two-channel LPCM audio signals. However, it can encode

multichannel audio signals from an external SPDIF source (such as a DVD player) with the

HDMI content stream.

Содержание 802BT









































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 802BT

Отзывы:

Quantum Data 802BT, Руководство пользователя, Страница: 168 / 744

Результаты поиска

Содержание 802BT

Отзывы: