Quantum Data 802BT Скачать руководство пользователя страница 137

Страница: 137 / 744

802BT/802R Video Test Generator User Guide

127

Testing InfoFrames (HDMI only)

The HDMI analyzer can analyze InfoFrame data from an incoming HDMI signal. With this

capability, an HDMI transmit device can be tested for its ability to transmit InfoFrame

packets correctly.

Testing HDMI transmit device InfoFrame capability

The 802 generator can monitor the InfoFrame content of the received HDMI signal.

To view current HDMI InfoFrame contents received from an HDMI transmitter:

1. Connect an HDMIdisplay to the HDMI Tx connector on the generator.

2. Connect the HDMI source to the HDMI Rx connector on the generator.

3. Setup the generator for HDMI output (see page 147).

4. If desired, monitor the video signal received on the HDMI Rx connector (see

“

Monitoring HDMI analyzer signal input

” on page 110).

5. Using the

Format

knob, select an appropriate format for the connected HDMI/DVI

display.

Note: To automatically configure the Format knob list based on the EDID structure of

a DDC-compliant display, hold down the R key, then press and release the ACS key.

Содержание 802BT









































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 802BT

Отзывы:

Quantum Data 802BT, Руководство пользователя, Страница: 137 / 744

Результаты поиска

Содержание 802BT

Отзывы: