Quantum Data 802BT Скачать руководство пользователя страница 171

Страница: 171 / 744

802BT/802R Video Test Generator User Guide

161

Testing HDMI InfoFrames

This section provides steps on how to test handling of auxiliary (InfoFrame) packets by an

HDMI display. The generator loads and sends default Auxiliary Video Information (XAVI),

Audio (XAUD), and Source Product Description (XSPD) InfoFrame packet buffers to the

display for each format (see table on page 149 for a listing of HDMI formats). The XAVI

and the XAUD InfoFrame packets are sent at every frame (repeated mode), while the

XSPD is sent only once. The XMPG and XGIF InfoFrames are gated off and not enabled.

Viewing InfoFrame contents

The 802 generator provides a convenient method for monitoring the InfoFrame content of

the transmitted HDMI signal.

To view current HDMI InfoFrame contents transmitted from the generator:

1. Connect an HDMI display to the Tx connector on the generator.

2. If necessary, set up the generator for HDMI output.

•

See “

Setting up the generator for HDMI operation

” on page 147 for steps on setting

up the generator for HDMI operation.

3. Using the

Format

knob, select the HDMI format you want to test.

4. Using the

Image

knob, select the PacketTx image.

The PacketTx image appears on the connected HDMI display. The image shows the

current settings for the AVI InfoFrame output.

Содержание 802BT









































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 802BT

Отзывы:

Quantum Data 802BT, Руководство пользователя, Страница: 171 / 744

Результаты поиска

Содержание 802BT

Отзывы: