Quantum Data 802BT Скачать руководство пользователя страница 165

Страница: 165 / 744

802BT/802R Video Test Generator User Guide

155

Testing HDMI audio

This section provides steps on how to test handling of audio packets by an HDMI display.

Testing can be performed using audio originating from both internal (generator) and

external sources. The generator supports both 2-channel SPDIF audio from internal

source and external source and up to 8-channel audio from an internal audio source.

There are seperate sets of images for testing 2-channel SPDIF audio and 8-channel

audio.

Testing 2-channel HDMI audio output from internal SPDIF source

To support testing of HDMI audio, the 802 generator provides two-channel LPCM audio

(using an internally-generated sinewave) at the highest audio sampling rate (48 kHz).

Multiple scenarios are provided that allow you to test one or both audio channels at

different amplitudes and frequencies, as well as test using the different supported

sampling rates.

The following table lists the images used to perform HDMI audio testing using an internal

audio source.

To test an HDMI display using HDMI audio from the generator:

1. Connect an HDMI display to the Tx connector on the generator.

2. If necessary, set up the generator for HDMI output.

•

See “

Setting up the generator for HDMI operation

” on page 147 for steps on setting

up the generator for HDMI operation.

3. Using the

Format

knob, select either the DMT0660 or 480i2x29 format.

Image

Description

AudioLR

Left and right audio channel output with adjustable amplitude.

AudioLRf

Left and right audio channel output with adjustable frequency.

AudioRAT

Left and right audio channel output with adjustable sampling rate.

Audio_L

Left audio channel output with adjustable amplitude.

Audio_Lf

Left audio channel output with adjustable frequency.

Audio_R

Right audio channel output with adjustable amplitude.

Audio_Rf

Right audio channel output with adjustable frequency.

Содержание 802BT









































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 802BT

Отзывы:

Похожие инструкции для 802BT

Бренды по названию

Популярные бренды

Quantum Data 802BT, Руководство пользователя

Результаты поиска

Содержание 802BT

Отзывы:

Похожие инструкции для 802BT

Бренды по названию

Популярные бренды