BMC
C
ONFIGURATION
G
ROUP
3-57
Use this page to configure the advanced SOL settings.
Figure 3-35.
SOL Advanced Settings Page
SSL
The
Secure Socket Layer
protocol was created by Netscape to ensure secure transactions
between web servers and browsers. The protocol uses a third party, a
Certificate Author-
ity (CA)
, to identify one end or both end of the transactions.
Using MegaRAC GUI, configure SSL certificate into the BMC. Using this, the device can be
accessed in a secured mode.
Table 22: SOL Settings Page
I
TEM
D
ESCRIPTION
Enable Serial over LAN
Checked=Enabled; Unchecked=Disabled.
Channel Privilege Level Limit
Select the IPMI Serial over LAN minimum user privilege:
Administrator
Operator
User
Save
Use this button to save your settings.
Advanced SOL Settings
Use this button to go to advanced SOL page.
Table 23: SOL Advanced Settings Page
I
TEM
D
ESCRIPTION
Character Accumulate Interval
The amount of the time that the BMC will wait before transmitting a
partial SOL character data package. 1-based 5ms increments. This value
must be from 1 to 255
Character Send Threshold
The BMC will send an SOL character data package containing the char-
acters as soon as this number of characters (or greater) has been
accepted. 1-based units. This value must be from 1 to 255.
Save
Use this button to save your settings.
Cancel
Use this button to cancel your settings.
