Q-P7HS - Pro7 Headset
The headset can be worn on either ear. The headset is available with a headband or neckband.
Volume:
There are 5 volume settings. Use the toggle at the rear of the headset to adjust volume by
pressing upwards for each step.
Speech:
The headset can be used in 2 speech modes, TalkLock, and PTT (push to talk).
TalkLock:
This mode puts the headset in hands free mode. To activate, press the silver button for less
than 1 second, the headset is then hands-free, to deactivate it, press silver button again. This will shut
off microphone.
PTT:
Press silver button while you are talking, release when finished.
Talk-lock feature
The user engages TalkLock mode by pressing ‘Page’ button for under a second. The headset will
remain in hands-free talk-lock mode until the ‘Page’ button is pressed again. The system reaches full
channel capacity when 6 users engage talk-lock. At full capacity, ie when 6 headsets are on
TalkLock, other headsets cannot enter a call. To ensure the system is operating efficiently it self-
monitors, and if it detects no voice activity for 5 minutes on a headset in talk-lock mode, it
automatically drops the TalkLock mode on the first headset to reach that condition freeing capacity
for all other users.
The table below shows the different audible tones for the different headsets status:
|
page
7
Volume - slide up/down
Push to Talk switch
Battery - to remove the battery, hold the mic
boom firmly in your hand and slide the ear pad
and the battery towards the mic boom tip
STATUS
TONE
Registration mode
1 beep every second
Out of range
2 beeps every 10 seconds
Battery low
3 beeps every 60 seconds
Registration complete
1 long beep (3 seconds)
Busy tone
3 long beeps
Headset not registered
1 beep every 3 seconds
Base capacity full
As per busy tone
Call drop
Bloop-bleep tone
Содержание Q-P7BS
Страница 1: ...Installation Manual...