Quail Digital Q-P7BS, Руководство по установке

Страница: 8 / 21

Q-P7CH - Pro7 Charger
The system comes with an 8 port charger and
storage unit . This should be located within the
transmit range of the Base so that the headsets
log on to the network automatically when
they’re uplifted from the charger rack. If the
charger is located out of range of the Base, log
on will be delayed until the headsets are
carried into range. Note that headsets out of range of the Base will be de-registered if the registration
button is pressed. The charger should remain plugged in at all times, ideally on a 24 hour constant
supply to maintain charging. (See red LED on front surface).
When a headset is not in use it should be placed back into the charger/storage rack. Charge time
is approximately 2.5 hours to full charge. When headsets are charging the blue light on the headset
will flash every 5 seconds. When fully charged, the blue light is constant.
Headsets will last for up to 8 hours between charges, slightly less on TalkLock mode. 3 beeps every
60 seconds indicate that the battery is getting low and that user should swap headsets.
Q-P7MK12 - Pro7 12 Button Keypad
The wireless message keypad is a transmitter used for sending pre-recorded
voice messages to the headset wearers using a license-free FM frequency.
When a key is pressed, the message will go via the Base to each headset. Key
pads are powered by 2 x AA batteries. When a button on the keypad is
pressed the green transmit indicator flashes for 2 seconds. If the red LED is on,
the batteries need replacing.
Please refer to keypad installation section for more details on how to record,
name and store the files and how to program the keypads for the different
locations.
| page 8
Accessories
Neckband Q-RH7NB
Headband Q-RH7HB
Battery Q-RH7BAT
Power Adapter Q-48V
Headset Charger Shelf Q-P7SHELF
Hygiene Covers (box of 200) Q-RH7HC