Quail Digital Q-P7BS, Руководство по установке

Страница: 11 / 21

Remote registration switch
The remote registration switch allows you to extend the ‘pin hole’
registration/reset switch on the base to a lower location to provide better
access to the user.
This switch is connected to the two screw
terminal connector located at the top of the
base and should be located just out of easy reach to avoid casual
pressing. Any 2-core cable can be used.
Please see pictures below showing how to open the remote
registration switch to make connections and locate it on the wall.
| page 11
1. Unclip cover 2. Remove 4 screws 3. Connect 2 wires to
switch terminals and fix
rear casing to the wall.
4m
2m
0m
Base
Registration
Button
Pin Wire colour Signal
1 White-Orange Audio data Out +
2 Orange Audio data Out -
3 White-Green Synchronization
4 Blue Audio data In +
5 White-Blue Audio data In -
6 Green Synchronization signal -
7 White-Brown GROUND
8 Brown POWER (+48V)
See wiring colour code below: