Quadro6L/4L Manual I: Installation Guide
Step 4: Making/Receiving Calls
Step 4: Making/Receiving Calls
Please Note:
The Quadro’s default settings are sufficient to make SIP phone calls. It
is not necessary to make any changes unless the user wants to create new SIP ex-
tensions on the Epygi SIP Server, create a private directory for several Quadro units,
or use alternate VoIP services. Refer to the Manual II - Administrator's Guide for
more information on these configurations.
•
To make a call to the PSTN, dial the local phone number. You may accelerate the dial-
ing process by adding the # after the last digit, e.g., 972-661-1335#. You are making a
local call through the PSTN.
•
To make a VoIP call to a user on the remote Quadro, lift the handset and dial 8 + SIP
Address (of the user on the remote Quadro) + #. You are calling over the Internet to a
remote user.
Please
Note: Epygi has a SIP Address test line to test newly provisioned Quadro de-
vices. Call 8 + 99 + # and you will hear a message if the call was successful. This
message comes from a Quadro in one of our offices. SIP Addresses are described be-
low.
•
Received PSTN calls will be directed to the corresponding SLA line.
Using the Default SIP Addresses
Making Internet IP calls is simple with the Quadro. By default, every standard (analog) tele-
phone connected to one of Quadro’s phone lines functions as an IP phone. If you open the
Extensions Management page, you will see that some SIP Addresses are available, one
attached to the Auto Attendant and one to each extension. These SIP addresses are the IP
telephone numbers of these extensions. Anyone with a Quadro or any other SIP IP device
on the Internet can place a call to [email protected] and the call will ring the
associated extension.
Under Extensions Management, you may edit the Display Names to assign extensions to
people.
Fig. l- 37: Extensions Management page
To do so, click on the box in the first column next to the extension to edit and click the Edit
button. When the page opens, go to General Settings and edit the Display Name and
click the Save button. Do not change any other settings at this time. For more information
on the Extensions Management settings, refer to the Administrator’s Guide and
Appendix:
Registering on Epygi’s SIP Server
of this document. The default SIP addresses are based
on internal parameters unique to each Quadro device. If the Quadro undergoes a factory
reset, the default addresses will be restored.
Quadro6L/4L; (SW Version 5.2.x)
43
Содержание Quadro6L
Страница 1: ......
