Quadro Quadro6L Скачать руководство пользователя страница 26 | Manualshive

Страница: 26 / 57

background image

Quadro6L/4L Manual I: Installation Guide

Step 2: Configuring the Quadro

Step 2.3: Internet Configuration Wizard

Open the Internet Configuration Wizard by selecting the corresponding menu item on the
System menu. The Internet Configuration Wizard is a tool for the administrator to config-
ure the WAN settings and to adjust Quadro's connectivity in the global network. It must be
run if Quadro is desired to be connected to the Internet.

The page Getting Started will be displayed:

Fig. l- 25: Internet Configuration Wizard

This first page of the Internet Configuration Wizard is for informational purposes only and
lists the items to be configured, Click on the Next button for the Uplink Configuration
page.

Before configuring the WAN port to the Internet, you need to get the following information
from your internet service provider:

•

Bandwidth - how much is available upstream and downstream?

•

WAN IP Configuration - is DHCP supported? If yes, no more information is
needed. If DHCP is not supported, the following data is needed: the WAN IP ad-
dress, the subnet mask, the IP address of the standard gateway and the IP ad-
dress of the Domain Name Server (DNS).

•

MAC address - needed when the ISP requires a specific MAC address for the
WAN.

Additionally, for Point-to-Point Protocol over Ethernet (PPPoE) WAN interface, you need to
get the following information from your internet service provider:

•

PPP Configuration - does your ISP use a dynamic or fixed WAN IP address? If

the WAN IP address is dynamic, no more information is needed. If the WAN IP
address is fixed, you will have to enter it.

•

Authentication - does your ISP require authentication? If authentication is re-
quired, information about the corresponding method (PAP, CHAP or MSCHAP) is
needed including the username and password of the PPPoE account.

This information will be needed to be inserted in the Internet Configuration Wizard.

Quadro6L/4L; (SW Version 5.2.x)

26

«
...
24
25
26
27
28
...
»

Содержание Quadro6L


























































Отзывы:

Нет отзывов

Похожие инструкции для Quadro6L

Бренд: Well Страницы: 140

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды