NOTE: as shown in FIGs 55 & 56 there
is a web loop installed on the side of the
quarter window.
This is to be used for
unhooking the quarter window only
and is not designed to be pulled down
on for installation!
Repeat the quarter
window install on the passenger side of
the vehicle. You may have to pull the
corners around towards the front or
back of the vehicle to center the top on
the vehicle. Once all body belt rail at-
tachments are secure and the top is cen-
tered, you can now reach through the
rear zipper on each side and tighten the
corner straps. Alternate tightening to
keep the top centered. Seal hook and
loop fasteners around the windows.
Once secure move to the rear driver’s
side corner and “roll” the plastic into
the Jeep body corner belt rail as shown
in FIGs 51 & 52. Repeat this procedure
on the passenger side.
Starting at the driver’s side front, right
behind the front seat, attach the front
vertical belt rail into the door surround
slot by “rolling” the plastic into the slot
(FIGs 49 & 50).
12
Once both corners are secured,“roll” the
plastic on the bottom of the quarter
windows into the body belt rail as
shown in FIGs 53 & 54.
Step 8: Installing the Top to the Jeep
®
Body
FIG49
FIG50
FIG51
FIG52
FIG53
FIG54
FIG55
FIG56
Q_TJ_ADV_11113.00XX_LTR_BU.qxp_QTOP 6/16/20 12:11 PM Page 12
