13
Once the Tailgate bar in secure, lower
zippers on both sides of the rear curtain
(FIG63) and then secure the rear zipper
cover flap as shown in FIG64.
above the door opening (FIGs 58 & 59).
Secure the strips on each side of the
vehicle. When complete each side should
look like FIG60.
Locate the two plastic strips sewn to the
sides of the top above each door (FIG57).
Starting with the front strips, slip the strips
into the channel in the door surround
Slide the”C” shaped channel onto the
tube sewn into the rear window with the
round seal down. See FIG61 for correct
alignment. Slide the tailgate bar all the
way across the rear curtain.
Open the rear tailgate. As shown in
FIG62, insert/roll the tailgate bar into the
mounts on each side of the tailgate with
the vinyl side of the rear curtain facing
the rear of the vehicle.
Step 9: Secure the Over Door Attachments
FIG57
FIG58
FIG59
FIG60
FIG61
FIG62
FIG63
FIG64
Step 10: Install the Tailgate Bar and Rear Window to the Jeep
®
Body
Q_TJ_ADV_11113.00XX_LTR_BU.qxp_QTOP 6/16/20 12:11 PM Page 13
