manualshive.com logo in svg

Quadratec QuadraTop Adventure Top 1113.00 Series, Руководство по установке, Страница: 11 / 20

Поделиться
Скачать
Quadratec QuadraTop Adventure Top 1113.00 Series Скачать руководство пользователя страница 11

11

Step 7B: Install Rear Window to the Top Deck

Locate the rear window and line up and
slide the rear window into the “C”
Channel located at the top of the rear
portion of the top deck (FIGs 44, 45 &
46). Once both quarter windows are
secured to the top deck, line up the dri-

ver’s side rear zipper on the quarter win-
dow and on the rear window and zip it
down a few inches (FIG 47).

Repeat this on the passenger side of the
rear window. 

You may have to lift the quarter win-
dow up to secure this second zipper.
Once both side zippers are secure, zip
the rear window zippers down about
half way (Fig 48). You will close these
zippers completely at the end of step 10.

Each Time you remove the windows:

Completely pull the windows out of
the “C” Channel before pulling the
windows down! (Fig 48A)

Do not “Peel” the windows out.

FIG44

FIG45

FIG46

FIG47

FIG48

FIG48A

When removing the quarter and rear windows from the Top deck be sure
to slide them out completely before pulling down. Dis-engage the side
hook and loop before sliding the windows out. DO NOT “Peel” the win-
dows out! Failure to completely disengage the windows from the “C”
Channel will damage the Top and quarter window!

There may be times when the “P” extrusion may come out of the “C”
Channel ends due to extreme downward pressure. This is normal. If this
occurs, slide the “P” extrusion out of the C channel and re-install
securing the window back into the “C” Channel.

Q_TJ_ADV_11113.00XX_LTR_BU.qxp_QTOP  6/16/20  12:11 PM  Page 11

Содержание QuadraTop Adventure Top 1113.00 Series





















Отзывы:

Нет отзывов