background image

QuadraTop

®

Adventure Top

for 2018-2022 

4 Door Jeep

®

  Wrangler  JLU

Item 

#

11113.2335

Loss of vehicle control involves risk of death or serious injury, particularly to 

parts of your body not restrained within vehicle. This product is intended for 

weather protection only and should not be relied upon to contain occupants 

in the event of an accident or to protect from either ground contact or falling 

objects. To reduce risk of accident or injury:

ALWAYS 

WEAR 

SEATBELTS

Always keep head, arms & body parts within vehicle.

Fully secure or stow the soft top before driving according to instructions.

Never try to latch or fold soft top while driving. Do not use if damaged or

worn.

Read and follow all instructions & warnings accompanying this product, in

your vehicle owner’s manual and Off Road Driving Supplement.

RISK OF EYE INJURY. Safety glasses should be worn at all times while install-

ing or maintaining this product.

PART LIST:

TOP DECK/HEADER AND REAR BOW ASSEMBLY   QTY 1 

DRIVER SIDE QUARTER WINDOW 

     QTY 1 

PASSENGER SIDE QUARTER WINDOW 

     QTY 1 

REAR WINDOW   

     QTY 1

CENTER BOW ASSEMBLY   

QTY 1

DRIVER SIDE DOOR SURROUND 

    QTY 1

PASSENGER SIDE DOOR SURROUND 

    QTY 1 

DOOR SURROUND KNOBS   

    QTY 8

TAILGATE BAR

    QTY 1 

REQUIRED TOOLS:

SAFETY GLASSES 

SOCKET WRENCH 

10MM SOCKET

This Replacement Top kit is designed to fit on your 4 Dr Jeep® Wrangler when 

the original soft top or hard top has been completely removed. Before begin-

ning your installation of this product, you will need to remove your existing soft 

top fabric, hardware or Hard top.

WARNING

CAUTION

NOTICE

TAILGATE  BAR  CORNER  MOUNTS 

 

  QTY  2                    

TAILGATE  BAR  SHORT  KNOBS             

  QTY  2                                                       

REAR BRACKET SCREWS WITH NUTS

QTY 4 

BRACKET SCREWS

QTY 8  

 

DOOR SURROUND BRACKETS

QTY 4   

DOOR SURROUND RUBBER

QTY 2   

4MM ALLEN WRENCH

QTY 1

  

 

Содержание QuadraTop 11113.2335
















Отзывы: