28
June 4, 2019
7027-805C
CB1200 Pellet Insert
Top & Bottom Frame
Door Latch
Side
Frame
Center Posts
Glass
Figure 28.2
Figure 28.1
Remove Door Latch First
and then Side Frame
Door Frame
shown with no
Glass or Glass
Frames
Remove 5 nuts from Bottom Frame
2. Replacing Side Glass
Handle glass assembly with care.
When cleaning glass:
CAUTION
• Avoid striking, scratching or slamming glass.
•
Do NOT clean glass when it is hot.
•
Do NOT use abrasive cleaners.
•
Use a hard water deposit glass cleaner on white film.
• Refer to maintenance instructions.
NOTE:
When removing the side glass with the door
latch, you must remove the door latch first before
removing the side frame. Use a powered Phillips
head screw driver to remove the 4 screws.
a. Be sure the appliance is allowed to cool, has been
unplugged and the exhaust blower is off.
b. Remove side glass frame.
c.
Loosen the top and bottom frame and slightly bend up
and out of the way.
d. Slide glass out the side and slide new glass in.
e. Re-install the side glass frame and tighten the top and
bottom frames.
f. Re-install the door latch, if applicable, and re-rope
the door.
D. Glass Replacement
PART NUMBERS:
LEFT OR RIGHT SIDE GLASS:
510-5400
CENTER BAFFLE:
510-5410
• Remove door from appliance and place face down on a
protected surface to avoid scratching the door.
• Remove all door rope.
•
Glass is 5mm thick high temperature
heat-resistant ceramic glass.
•
DO NOT REPLACE with any other
material.
• Alternate material may shatter and cause
injury.
WARNING
NOTE:
DO NOT LET Air Wash Spacers fall down
from top frame when removing and replacing
center glass.
1. Replacing Center Glass
b. Be sure the appliance is allowed to cool, has been
unplugged and the exhaust blower is off.
c.
Using a nut driver remove the (5) bottom nuts and
remove the bottom glass frame (
Figure 28.1).
d. Slightly bend up and out of the way the 2 center posts
and slide the glass out the bottom.
e. Slide new glass in, reposition the 2 center posts and
re-install bottom glass frame.
f. Re-rope the door.
