18
7047-910
October 14, 2013
5100 I-ACC
Corner Brackets
Figure 18.4
Figure 18.3
Secure 2 Side Surrounds to
Top Surround
Figure 18.5
SURROUND
ATTACH POINTS
STOVE TOP
Remove 2 screws from both sides.
Adjust the legs up or down to level
appliance.
Figure 18.1
Attachment Bar
Chimney Mounting Bar
5/16 Nuts
Attachment
Bar
5/16 Bolts
Figure 18.2
D. Leveling Legs
1. Remove the 2 screws already installed on each leg.
2. Move legs to the desired height
.
3. Re-install the screws to secure in place.
E. Securing Appliance to Stove Pipe/Liner
1. Once you have the appliance in place and secured, reach
up through the flue opening and grab the attachment bar
and pull down inside flue opening.
Figure
18.2
.
2. Insert the 5/16 bolts inside the cast flue and through the
chimney mounting bar. Securely tighten the nuts. Fas-
teners are provided.
3. Re-install the tube channel assembly, baffle board,
ceramic blanket and baffle protection channel.
F. Surround & Trim Kit Installation
1. Lay surround face down on a protected surface to pre-
vent scratching.
2. Using a Phillips head screw driver attach the side sur-
rounds to the top surround using 2 #8 sheet metal screws
provided with the kit.
Figure 18.3.
3. Lay the trim face down and place the corner brackets into
position.
4. Using a standard flat screw driver tighten the corner
brackets.
Figure 18.4.
.
5. Slide the trim over the surround set.
6. Install the surround set and trim set to the outer can.
Place the hook in the surround sides over the surround
attachment screws, 2 on each side.
Figure 18.5.
7. Place top on top of appliance.
