20
7037-172
September 26, 2016
4300 Wood Appliance Series ACC
ARS
Channel
Reinstall 2 front
bricks back into
firebox
ARS Access
Cover
NOTE: The Ash Removal System, must be
installed first before installing the legs.
Included in Kit
: ARS door assembly, ARS latch assembly, Ash
Removal Box, Ash Removal Drawer, ARS Channel, ARS Cover,
and fastener package.
Tools Required:
7/16 socket wrench, 9/16 socket wrench, 3/8
open end wrench, phillips screw driver, and hammer.
C.
Leg Kit and Ash Removal System (ARS)
Installation
Begin installing the ARS System.
1. Remove leg mount brackets packaged inside of firebox
and set aside.
2.
Remove the 2 bricks in the front most part of the firebox
(Figure 18.1 on page 18)
.
3. Lay appliance on its back on a protective pad or pallet
(Figure 18.2 on page 18)
.
4.
Remove heat shield by loosening the four bolts using 3/8
open end wrench
(Figure 18.2 on page 18)
.
5. Remove 8 nuts that hold the cover plate on using a 7/16
socket wrench; discard cover plate
(Figure 18.2 on page
18)
.
CHECK GASKET!
• Verify that the gasket is present and that the glossy
side is away from firebox bottom.
• It is important that the gasket is put in correctly for
sealing capabilities.
Warning!
Ash Removel
Drawer
Adapters
Cover
Plate
B. Access Cover Handle
Insert Access Cover Handle handle into slot of ARS Cover to
remove ARS Cover for cleaning ash out of firebox
(Figure 20.4)
.
Figure 20.1
Figure 20.2
Figure 20.3
Figure 20.4
