Quadra-Fire 43M-ACC-MBK Скачать руководство пользователя страница 2

Страница: 2 / 28

7037-172

September 26, 2016

4300 Wood Appliance Series ACC

NOTE: Hearth & Home Technologies, manufacturer of

this appliance, reserves the right to alter its products, their

specifications and/or price without notice.

TABLE OF CONTENTS

Safety Alert Key:

•

DANGER!

Indicates a hazardous situation which, if not avoided will result in death or serious injury.

•

WARNING!

Indicates a hazardous situation which, if not avoided may result in death or serious injury.

•

CAUTION!

Indicates a hazardous situation which, if not avoided, may result in minor or moderate injury.

•

NOTICE:

Indicates practices which may cause damage to the appliance or to property.

Quadra-Fire is a registered trademark of Hearth & Home Technologies.

Important Safety Information ...........3

A. Appliance Certification

.............................................3

B. BTU & Efficiency Specifications

..............................3

C. Mobile Home Approved

...........................................3

D. Glass Specifications

................................................3

E. Non-Combustible Materials ......................................3

F. Combustible Materials ..............................................3

Getting Started ..................................4

A. Design and Installation Considerations ....................... 4

B. Fire Safety ................................................................4

C. Negative Pressure .................................................5

D. Tools And Supplies Needed ....................................5

E. Inspect Appliance and Components ........................5

F. Install Checklist .........................................................6

Dimensions and Clearances ............7

A. Appliance Dimensions .............................................7

B. Hearth Protection Requirements

.............................10

C. Clearances to Combustibles ...................................12

Chimney Systems ...........................13

A. Locating Your Appliance & Chimney

.......................13

B. Chimney Termination Requirements .......................14

C. 2-10-3 Rule ............................................................14

D. Chimney Height/Rise and Run

...............................15

E. Venting Components ..............................................15

F. Chimney Systems ....................................................15

G. Installing Chimney Components ..............................17

H. Proper Draft

...........................................................17

Appliance Set-Up ............................18

A. Pedestal Assembly and

Ash Removal System (ARS) Installation .................18

Access Cover Handle

..............................................20

C. Leg Kit and Ash Removal

System (ARS) Installation........................................20

D. Traditional Leg Installation ......................................22

E. Door Handle Assembly

............................................23

F. Outside Air Kit Installation

........................................23

G. Blower (Optional)

....................................................24

H. Adjusting the Blower Speed Control

.......................24

Mobile Home Installation ................25

Reference Materials ........................26

Accessory List ................................27

Содержание 43M-ACC-MBK





























Результаты поиска

Содержание 43M-ACC-MBK

Отзывы:

Похожие инструкции для 43M-ACC-MBK

Бренды по названию

Популярные бренды

Quadra-Fire 43M-ACC-MBK, Руководство по установке

Результаты поиска

Содержание 43M-ACC-MBK

Отзывы:

Похожие инструкции для 43M-ACC-MBK

Бренды по названию

Популярные бренды