Quadra-Fire 43M-ACC-MBK Скачать руководство пользователя страница 1

Страница: 1 / 28

7037-172

September 26, 2016

4300 WOOD APPLIANCE SERIES

Automatic Combustion Control (ACC)

Model:

43M-ACC-MBK

43ST-ACC-B

HOT SURFACES!

Glass and other surfaces are hot

during operation AND cool down.

Hot glass will cause burns.

•

Do not touch glass until it is cooled

•

NEVER allow children to touch glass

•

Keep children away

•

CAREFULLY SUPERVISE children in same room as

appliance.

•

Alert children and adults to hazards of high temperatures

• High temperatures may ignite clothing or other

flammable materials.

•

Keep clothing, furniture, draperies and other flammable

materials away.

WARNING

If the information in these instruc-

tions is not followed exactly, a

fire could result causing property

damage, personal injury, or death.

• Do not store or use gasoline or other flam

mable vapors and liquids in the vicinity of

this or any other appliance.

• Do not over fire - If appliance or chimney

connector glows, you are over firing. Over

firing will void your warranty.

• Comply with all minimum clearances to

combustibles as specified. Failure to

comply may cause a house fire.

WARNING

Fire Risk.

For use with solid wood fuel only.

Other fuels may over fire and generate

poisonous gases (i.e. carbon monoxide).

Installation Manual

Installation & Appliance Set-Up

INSTALLER: Leave this manual with party responsible for use and operation.

OWNER: Retain this manual for future reference.

NOTICE: DO NOT DISCARD THIS MANUAL

NOTE

To obtain a French translation of this manual, please contact

your dealer or visit www.quadrafire.com

Pour obtenir une traduction française de ce manuel, s’il vous

plaît contacter votre revendeur ou visitez www.quadrafire.com

O-T L

Tested and

Listed by

Portland

Oregon USA

OMNI-Test Laboratories, Inc.

Installation and service of this

appliance should be performed by

quali ed personnel. Hearth & Home

Technologies recommends HHT

Factory Trained or NFI certified

professionals.

Содержание 43M-ACC-MBK





























Результаты поиска

Содержание 43M-ACC-MBK

Отзывы:

Похожие инструкции для 43M-ACC-MBK

Бренды по названию

Популярные бренды

Quadra-Fire 43M-ACC-MBK, Руководство по установке

Результаты поиска

Содержание 43M-ACC-MBK

Отзывы:

Похожие инструкции для 43M-ACC-MBK

Бренды по названию

Популярные бренды