quadient DS-200iQ, Инструкция по установке

Страница: 7 / 49

3
AUG 2020
INSTALL GUIDE
1 SAFETY STANDARDS COMPLIANCE DS-200iQ / DS-600iQ
REV 00
QDT-RND-GEN-00000159-A-00
Figure 1.1 – ShockWatch
QDT-RND-GEN-00000160-A-00
Figure 1.2 – TiltWatch
1.4 SAFETY
The information presented in this section is given as a guide to general precautions
and safety procedures that should be exercised during installation, operation,
maintenance and or servicing of this machine.
Whilst every effort has been made to ensure completeness of this document, owners,
operators, and service technicians of this machine are reminded of their responsibilities
to comply with all relevant legislations including Risk/COSHH Assessments if applicable
and Approved Codes of Practice.
Always be aware of all warnings and notes that are listed within this manual or noted
anywhere on the machine itself. Various symbols are used in this manual, and on the
product itself to ensure correct usage, to prevent danger to the user and others, and to
prevent property damage.
The meanings of these symbols are described in section 1.4.1 Safety Symbols , and
is important these symbols are observed, and their descriptions read thoroughly to
understand their meanings.
Prior to carrying out any installation, operation, maintenance or servicing procedures
on this machine, ensure you have fully observed and understood all safety notes
detailed in this section.