quadient DS-200iQ, Инструкция по установке

Страница: 9 / 49

5
AUG 2020
INSTALL GUIDE
1 SAFETY STANDARDS COMPLIANCE DS-200iQ / DS-600iQ
REV 00
1.4.3 POWER CONNECTIONS SAFETY NOTES
WARNING
▪ Ensure any isolation or disconnect device, including the mains power supply
remain unobstructed at all times.
▪ Ensure the mains power cable and its connectors are sound and undamaged.
Should any electrical cable become damaged do not operate the machine,
and ensure any damaged electrical cable is replaced with a correctly certified
and rated replacement by the manufacturer.
▪ A voltage of 230V may be present inside this machine. The power source can
produce enough voltage and current to be very dangerous.
▪ This machine is equipped with a three-pronged plug. One of the prongs on the
plug provides a safety grounding (protective earth) feature. Ensure the plug
is always connected to a properly wired three-prong outlet. Do not use a two-
prong adapter without grounding the machine properly.
▪ The machine must be earthed. Never remove the third prong from the plug.
The safety grounding (protective earth) feature provides extra protection in
the event of an electrical problem.
▪ The mains power supply is fused on both live and neutral sides. Service
personnel should be aware that a mains voltage can exist even if no lighted
neon shows.
1.4.4 EMERGENCY SAFETY NOTES
WARNING
▪ Opening any cover of the machine will trigger the interlock safety cut-off
switch and stop the machine operation (including all moving parts).
▪ Should a fault occur with the machine, immediately isolate the machine
completely from the power source, by pressing the toggle switch located
at the rear of the Insert Head to the off position, and unplugging the mains
power cable completely from the electrical power supply.